Care & Cleaning

For best results, keep the following in mind when caring for your KOHLER^® product:

Always test your cleaning solution on an inconspicuous area before applying to the entire surface.
Wipe surfaces clean and rinse completely with water immediately after applying cleaner. Rinse and dry any overspray that lands on nearby surfaces.
Do not allow cleaner to soak.
Use a soft, dampened sponge or cloth. Never use an abrasive material such as a brush or scouring pad to clean surfaces.
Click here for warranty information.

* Success with cleaners and procedures is dependent upon such factors as the hardness and temperature of the water, using exact measurements of ingredients, changes in cleaning formulas and the condition of the product being cleaned. Since there are variations within these factors, Kohler cannot guarantee the effectiveness of the formulas.

Furniture

Wood Furniture

Blot spills immediately with a soft, damp cloth.
Test cleaners in a discrete location first, such as the inside of a door, to ensure that there is no adverse reaction.
Do not expose wood furniture to direct sunlight, drying heat sources or dampness.
Protect wood surfaces by using felt, leather or cork under accessories. Never slide objects across wood surfaces.
Dust frequently with a soft cloth in the direction of the grain.
Use only products specifically made for cleaning wood. Avoid using oily polishes or waxes, or products containing silicone.

Cleaning instructions listed pertain only to their corresponding material, and are not intended for faucet cleaning. Faucet cleaning instructions for chrome and vitreous china.

Success with cleaners and procedures is dependent upon such factors as the hardness and temperature of the water, using exact measurements of ingredients, changes in cleaning formulas and the condition of the product being cleaned. Since there are variations within these factors, Kohler cannot guarantee the effectiveness of the formulas mentioned.

Care Tip
Every six months, remove soil buildup by rubbing with a soft cloth dampened in a 50/50 solution of warm water and an ammonia-free detergent. Wipe clean with cloth dampened in warm water. Wipe dry.

Countertop Surfaces

Clean up spills immediately.
Wash stone surfaces regularly with a mild (pH balanced) detergent, warm water and non-abrasive cloth. Never use highly acidic, highly alkaline, or abrasive cleaners.
Consider products that seal and restore marble and stone. Application of a sealer will help make the surface less porous and more resistant to stains.

Success with cleaners and procedures is dependent upon such factors as the hardness and temperature of the water, using exact measurements of ingredients, changes in cleaning formulas and the condition of the product being cleaned. Since there are variations within these factors, Kohler cannot guarantee the effectiveness of the formulas mentioned.

Care Tip

KOHLER^® countertops are supplied pre-sealed; however, it is recommended that you test the seal after a few years of use. Simply apply a few droplets of water to the surface. If the water beads, your countertop is maintaining its seal. If the water soaks into the countertop, resealing should be considered.

Click here for warranty information or call Toll Free no. 1 800 103 224.

_{* Success with cleaners and procedures is dependent upon such factors as the hardness and temperature of the water, using exact measurements of ingredients, changes in cleaning formulas and the condition of the product being cleaned. Since there are variations within these factors, Kohler cannot guarantee the effectiveness of the formulas.}